The Vesper Marine SP160 AIS splitter with built in low noise amplifier provides excellent AIS reception and range.
NZ $439.00
The Vesper Marine SP160 AIS splitter is an antenna splitter which provides signal gain - improving AIS reception and increasing range. This feature is due to the built in low noise amplifier.
Designed to work with all Vesper Marine AIS transponders including the XB-8000 transponder, it also has on screen VHF-in-use indicator when used with the WatchMate 850 and WatchMate Vision AIS transponders.
To simplify installation, you can share an existing VHF antenna by using this splitter. The unit removes the need for a separate VHF antenna for an AIS receiver or transponder and allows a single antenna to be shared with a VHF radio.
SP160 AIS Splitter Specifications
Frequency range
156 MHz to 163 MHz
Operating temperature
-25°C to +55°C (-13°F to 131°F)
Environmental
Watertight (USCG CFR-46, IPx7)
Power supply
10-32 VDC, <0.8W nominal
Maximum current
270 mA
Overall size
135 mm Long x 107 Wide x 56 Deep (5 5/16” x 4 1/4“ x 2 1/4”)
(includes connectors)
Maximum VHF power
25 W
Maximum AIS power
12.5 W
Compatibility
Fully compatible with all Vesper Marine AIS transponders and receivers. Also compatible with other manufacturer's AIS receivers and transponders and will typically increase their performance.
Antenna connector
50 ohm, SO-239 (UHF)
VHF and AIS connectors
SO-239 (UHF). Requires two appropriate length standard 50 ohm patch cables with PL-259 plugs (two 2 m (6.5 ft) cables included).
AM and FM connectors
75 ohm, BNC, optional 2m (6') cable available BNC to Motorola plug
Patch cable
Two provided as standard. 2m (6.5ft) long 50 Ω cable with PL259 connectors.
The Vesper Marine SP160 AIS splitter is an antenna splitter which provides signal gain - improving AIS reception and increasing range. This feature is due to the built in low noise amplifier.
Designed to work with all Vesper Marine AIS transponders including the XB-8000 transponder, it also has on screen VHF-in-use indicator when used with the WatchMate 850 and WatchMate Vision AIS transponders.
To simplify installation, you can share an existing VHF antenna by using this splitter. The unit removes the need for a separate VHF antenna for an AIS receiver or transponder and allows a single antenna to be shared with a VHF radio.
SP160 AIS Splitter Specifications
(includes connectors)